Weight Checks Module

From Commander4j Wiki
Revision as of 14:40, 3 September 2019 by Dgarratt (Talk | contribs) (→‎System Keys)

Jump to: navigation, search

Weight Checks Module

This functionality is included in version 7.14 of Commander4j. If you are running an older version you will need to upgrade before you will be able to use the options shown here.


Capturing Weights Results from Scales

Weight checks data capture.jpg

This screen shows the operator panel where data from the scales is recorded in the database and plotted on screen. You will need to configure the other screens before you can use this. See [Scales], Workstations, TNE's (Tolerable Negative Errors), Product Groups and Container Codes

Reporting on Weight Checks

Weight checks reports.jpg

Weight checks reports detailed.jpg

Weight checks reports mean above nominal.jpg

Weight checks reports t1 or t2.jpg

Sample Points

Weight checks sample points.jpg

Scales

Weight checks scales.jpg

Workstations

Weight checks workstations.jpg

TNE's (Tolerable Negative Errors)

Weight checks tnes.jpg

Product Groups

Weight checks product groups.jpg

Container Codes

Weight checks container codes.jpg

Material Administration

Weight checks materials.jpg

System Keys

Weight checks system keys.jpg

There are only 2 entries in the System Keys table which relate to Weight Checks.

WEIGHT SAMPLE FREQUENCY is used generate a reminder when a sample check is due and is assumed to be the number of minutes.

WEIGHT SAMPLE SIZE determines the number of samples which are to be weighed during each sample session. This is currently a global setting for all weight check

Retrieved from "https://commander4j.com/mw/index.php?title=Weight_Checks_Module&oldid=929"